Problem
I have install total 4GB memory on my motherboard. However, it can only recognize around 3.1GB or less. My friend's SLI board even less than 3GB. What's up? How should I do to recognize 4GB totally?
Answer
If you installed total 4GB memory, the system will detect less than 4GB of total memory because of address space allocation for other critical functions, such as:
- System BIOS (including motherboard, add-on cards, etc..)
- Motherboards resources
- Memory mapped I/O
- configuration for AGP/PCI-Ex/PCI
- Other memory allocations for PCI devices
Different onboard devices and different add-on cards (devices) will result of different total memory size.
e.g. more PCI cards installed will require more memory resources, resulting of less memory free for other uses.
On a SLI system, since PCI-Ex graphic cards will occupy around 256MB, another 256MB will be occupied after you install a 2nd PCI-Ex graphic card. Hence, 2.75GB memory left only if two SLI cards installed on A8N-SLI Premium while 3.0GB memory left with one graphic card without other add-on devices.
This limitation applies to most chipsets & Microsoft Windows 32-bit version operating systems.
If you install Windows 32-bit version operating system, we recommend that you install less than 3GB of total memory. If more than 3GB memory is required for your system, then below two conditions must be met:
1. The memory controller which supports memory swap functionality is used. Chipsets later than Intel 975X, 955X, Nvidia NF4 SLI Intel Edition, Nvidia NF4 SLI X16, and AMD K8 CPU architecture support memory swap function.
2. Windows 64-bit OS which can address more than 4GB memory.
You can check below URLs for reference:
http://dlsvr.asus.com/pub/ASUS/mb/4GB_Rev1.pdf
http://www.intel.com/support/motherboards/server/sb/cs-016594.htm
Related Model
A8N32-SLI Deluxe
A8N5X
A8N-E
A8NE-FM
A8N-SLI
A8N-SLI Deluxe
A8N-SLI Premium
A8N-SLI SE
A8N-VM
A8N-VM CSM
A8N-VM CSM/NBP
more...
How many stars will you give to this FAQ?
In order to provide better quality of FAQ content, please take few seconds to vote for this FAQ: (1-5 Stars)
Five Stars
Four Stars
Three Stars
Two Stars
One Star
Total votes:
Does this FAQ solve your problem?
Yes
No
How do you feel about this FAQ?
This FAQ is not specific enough.
This FAQ is too complicated to comprehend.
The title of this FAQ is not clear.
Some of the images in this FAQ cannot be displayed properly or lack related images.
Some of the links in this FAQ cannot be opened properly or lack related links.
Your Suggestion
:
We will modify this FAQ based on your comment. However, we will not reply any technical problem here. If you have technical query, please click
Technical Inquiries
for assistance.
Other Related FAQ
Product
Problem Description
Model
Update
I have install total 4GB memory on my motherboard. However, it can only recognize around 3.1GB or less. My friend's SLI board even less than 3GB. What's up? How should I do to recognize 4GB totally?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2010/01/07
I have install total 4GB memory on my motherboard. However, it can only recognize around 3.1GB or less. My friend's SLI board even less than 3GB. What's up? How should I do to recognize 4GB totally?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2010/01/07
I have install total 4GB memory on my motherboard. However, it can only recognize around 3.1GB or less. My friend's SLI board even less than 3GB. What's up? How should I do to recognize 4GB totally?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2010/01/07
Both Asus and third-party utilities such as PcProbII/AISuite/CPUZ shows that my CPU Vcore reading drops as the CPU load goes up.
This also happens after I set CPU Vcore to a set value instead of the preset [AUTO]. Why does the motherboard act like this?
Will this effect the overall stability of my system?
All P5 MB
,
AS-D250
,
AS-D260
,
AS-D325
,
AS-D355
...
2010/01/07
Both Asus and third-party utilities such as PcProbII/AISuite/CPUZ shows that my CPU Vcore reading drops as the CPU load goes up.
This also happens after I set CPU Vcore to a set value instead of the preset [AUTO]. Why does the motherboard act like this?
Will this effect the overall stability of my system?
All P5 MB
,
AS-D250
,
AS-D260
,
AS-D325
,
AS-D355
...
2010/01/07
My system fails to enter Standby mode under VISTA OS with pure settings (Untouched freshly installed OS, all BIOS settings set to default, and jumpers are set to default settings as according to user manual.) System returns right back to the system every time when I tried to enter Standby mode.
I have installed all related drivers for motherboard and VGA, and have only PS/2 keyboard and USB mouse connected to the motherboard.
Anything I can do to enter standby on this motherboard?
A7A133
,
A7A266
,
A7A266-E
,
A7M266
,
A7M266-D
...
2009/12/31
I recently purchased a Seagate Barracuda 7002.11 hard drive to upgrade my system. But I find the hard drive tends to freeze or time out for minutes sometimes. When I restarted computer last time, the hard drive cannot be recognized. How do I resolve this issue?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2009/12/31
I recently purchased a Seagate Barracuda 7002.11 hard drive to upgrade my system. But I find the hard drive tends to freeze or time out for minutes sometimes. When I restarted computer last time, the hard drive cannot be recognized. How do I resolve this issue?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2009/12/31
I have recently build a new system for myself, and loaded Windows VISTA operating system onto it.
It works flowlessly apart from the fact that it shows ACPI error under Event Log.
Is that normal?
All P5 MB
,
Blitz Extreme
,
Blitz Formula
,
COMMANDO
,
Crosshair
...
2009/12/22
My system always resume immidately after entering S3 mode under Windows XP when having any USB devices connected to my system.
What can I do to resolve this problem?
A8N32-SLI Deluxe
,
A8N5X
,
A8N-E
,
A8NE-FM
,
A8N-SLI
...
2009/12/18
previou page
1
2
3
4
5
6
7
8
9
10
next page